Template Priority - Polycom DMA 7000 Operation Manual

Conference Templates

Template Priority

Polycom, Inc.
• If the system selected a Polycom RMX MCU, it falls back to its default
conference template (see
template happens to be linked to a profile that this MCU doesn't have, the
system falls back to its built-in conference properties settings.
See also:
"Conference Templates Procedures"
"Template Priority"
"Conference Templates List"
"Add Conference Template Dialog Box"
"Edit Conference Template Dialog Box"
"Conference Settings"
A user (local or enterprise) has one or more conference rooms, and each room
may or may not have a specifically assigned template (typically, however,
conference rooms use the system's default template, as specified on the
Conference Settings page).
An enterprise user can be associated with multiple enterprise groups, and each
group may or may not have a specifically assigned template.
You can rank the conference templates by priority, so that the system knows
which template to use when the user is associated with more than one.
When someone dials into a conference room, the system uses these rules (in
order of importance) to determine which template to use for the conference:
If the conference room has a specifically assigned template (not the
1
system default) associated with it, use that template.
If the user associated with the conference room belongs to one or more
2
enterprise groups that have specifically assigned templates, use the
template with the highest priority.
Otherwise, use the system default conference template.
3
See also:
"Conference Templates Procedures"
"Add Conference Template Dialog Box"
"Edit Conference Template Dialog Box"
"Conference Settings"
"Conference Settings"
on page 94
on page 77
on page 79
on page 79
on page 87
on page 96
on page 94
on page 79
on page 87
on page 96
Conference Setup
on page 96). If the default
77