Polycom DMA 7000 Operation Manual page 64

DMA Operations Guide
56
In the Actions list, select Join CMA.
3
In the Join CMA dialog box, enter the host name or IP address of the
4
Polycom CMA system and the credentials with which to log into it. Then
click OK.
When asked to confirm that you want to join, click Yes.
5
The system connects to the Polycom CMA system, establishes the
integration, and obtains site topology data (this may take a few minutes).
A dialog box informs you when the process is complete and the system is
ready to restart. Shortly after that, the system logs you out and restarts.
Click OK to log out immediately, or simply wait.
6
Note
You may need to restart your browser or flush your browser cache in order to log
back into the system.
Log back into the system, go to Configuration > System > CMA
7
Integration, and verify the CMA integration information.
Go to Configuration > Site Topology > Sites, and from there to the other
8
site topology pages, to see the site topology information obtained from
the Polycom CMA system.
To terminate the integration with a Polycom CMA system
If this is a two-node system, make sure that both nodes are running and
1
clustered. Make sure that there are no calls on the system, and that all
MCUs are out of service. See
Go to Configuration > System > CMA Integration.
2
In the Actions list, select Leave CMA.
3
When asked to confirm that you want to leave, click Yes.
4
The system connects to the Polycom CMA system and terminates the
integration. A dialog box informs you when the process is complete and
the system is ready to restart. Shortly after that, the system logs you out
and restarts.
Click OK to log out immediately, or simply wait.
5
Note
You may need to restart your browser or flush your browser cache in order to log
back into the system.
Log back into the system, go to Configuration > System > CMA
6
Integration, and verify that the system is no longer integrated with the
Polycom CMA system.
System Configuration Procedures
"MCU Procedures" on page 64.
Polycom, Inc.