Polycom DMA 7000 Operation Manual page 195

Enterprise Directory Integration Report
Polycom, Inc.
Table 11-11 Fields on the Enterprise Directory Integration page (continued)
Field
Site
All Domains
Domain Name
Domain DN
Domain Server
Status
Description
The Active Directory site name for the system. Available
only if Auto-discover from FQDN (serverless bind) is
selected on the Enterprise Directory
If serverless bind is enabled, but no site is retrieved, the
reason could be:
• Site could not be determined: the system's subnet
isn't mapped to a site (see
http://support.microsoft.com//kb/889031).
• Auto-discover failed or is disabled: could be
problem with DNS domain name or missing SRV
records on DNS server.
Name of the domain.
All domains in the forest are listed, whether or not
they're used by the system.
Distinguished name of the domain.
Fully qualified domain name of the server.
Indicates if the system contacted a domain controller in
that domain (in order to retrieve attributes not in the
global catalog or to get member information for its global
groups) and the results:
• Not required: no groups from that domain have
been imported into the Polycom DMA system and all
attributes needed were in the global catalog.
• Partially loaded or Unable to load: see Error
Message and the list of groups with incomplete
information for more details.
Displays an error message if the domain server couldn't
be contacted. This can happen if the DNS server
resolves the name to an IP address that isn't valid or is
temporarily unavailable. Return to the Enterprise
Directory Integration page and try again.
If the system repeatedly fails to contact a domain,
troubleshoot your network.
System Reports
page.
187