Polycom DMA 7000 Operation Manual page 103

Conference Templates
Polycom, Inc.
To enable conferences using this template to cascade across multiple
b
MCUs, check Cascaded conference in RMX General Settings.
Complete the remaining sections as desired. See
c
Template Dialog Box"
Click OK.
4
The new template appears in the Conference Templates list.
To add a conference template linked to an RMX profile
Go to Configuration > Conference Setup > Conference Templates.
1
In the Actions list, click Add.
2
In the Add Conference Template dialog box, specify all the conference
3
properties for this template:
In Common Settings, enter an appropriate name and description.
a
To enable conferences using this template to cascade across multiple
b
MCUs, check Cascaded conference in RMX General Settings.
Check Use existing profile and select the one you want from the RMX
c
profile name list.
The list contains the profiles available on the RMX MCUs that have
been added to the Polycom DMA system.
Click OK.
4
The new template appears in the Conference Templates list.
To edit a conference template
Go to Configuration > Conference Setup > Conference Templates.
1
In the Conference Templates list, select the template of interest, and in
2
the Actions list, click Edit.
In the Edit Conference Template dialog box, edit the settings as desired.
3
See "Edit Conference Template Dialog Box"
Click OK.
4
The template changes appear in the Conference Templates list.
To change a conference template's priority
Go to Configuration > Conference Setup > Conference Templates.
1
On the Conference Templates list, select the template whose priority you
2
want to change.
on page 79.
on page 87.
Conference Setup
"Add Conference
95