Configure History Record Retention; Join Or Leave A Polycom Cma System - Polycom DMA 7000 Operation Manual

System Configuration Procedures

Configure History Record Retention

Join or Leave a Polycom CMA System

Polycom, Inc.
Click Update.
4
A dialog box informs you that the configuration has been updated.
Click OK.
5
See also:
"Logging Configuration"
To configure history record retention
Log into the system as a user with the Auditor role and go to
1
Configuration > System > History Record Retention.
Specify the number of each type of record to retain.
2
Specify how often you want the system to purge records in excess of
3
those numbers.
Click Update.
4
A dialog box informs you that the configuration has been updated.
Click OK.
5
See also:
"History Record Retention"
Caution
Integrating with a Polycom CMA system or terminating the integration requires a
system restart and terminates all active conferences.
Only a single Polycom DMA system can be integrated with a Polycom CMA system.
Your DNS server(s) must be able to resolve the Polycom DMA system's FQDN to
its virtual IP address. See
page 12.
In addition, the DNS server(s) must be able to resolve Polycom CMA system's
FQDN to its IP address. This is necessary even if you specify the Polycom CMA
system's IP address when you join it.
To integrate with a Polycom CMA system
If this is a two-node system, make sure that both nodes are running and
1
clustered. Make sure that there are no calls on the system, and that all
MCUs are out of service. See
Go to Configuration > System > CMA Integration.
2
on page 47
on page 48
"Add DNS Records for Polycom DMA System"
"MCU Procedures"
System Configuration
on
on page 64.
55