DMA Operations Guide
52
Record the serial number for each Polycom DMA server:
2
Server A: ____________________________
Server B: ____________________________ (none for single-server system)
Go to http://www.polycom.com/activation.
3
If you don't already have one, register for an account. Then log in.
4
Select Product Activation.
5
In the License Number field, enter the software license number listed on
6
the first (or only) server's License Certificate (shipped with the product).
In the Serial Number field, enter the first (or only) server's serial number
7
(which you recorded in step 2).
Click Generate.
8
When the activation key for the first (or only) server appears, record it:
9
Server A: __________-__________-_________-___________
10 If you have a single-server Polycom DMA system, you're finished with
this procedure. Continue to the next procedure.
11 If you have a two-server cluster, repeat steps 6–8, this time entering the
second license number you received and the second server's serial
number (also recorded in step 2).
Caution
An activation key is linked to a specific server's serial number. For a two-server
cluster, you must generate the activation key for each server using that server's
serial number. Licensing will fail if you generate both activation keys from the same
server serial number.
12 Click Generate.
13 When the activation key for the second server appears, record it:
Server B: __________-__________-_________-___________
To enter license activation key codes
Go to Configuration > System > License and Capabilities.
1
In the Activation key field for the first (or only) server, enter the
2
activation key code that was generated for that server's serial number.
Caution
An activation key is linked to a specific server's serial number. Each Activation
Key field is labeled with a serial number. For a two-server cluster, make sure that
the activation key code you enter for each server is the correct one for that server's
serial number.
System Configuration Procedures
Polycom, Inc.
Need help?
Do you have a question about the DMA 7000 and is the answer not in the manual?