Local Account Configuration - Polycom DMA 7000 Operation Manual

DMA Operations Guide

Local Account Configuration

38
Table 3-7 Fields on the Local Password Requirements page (continued)
Field
Uppercase letters
Numbers
Special characters
Maximum consecutive
repeated characters
See also:
"Management and Security Overview"
"Certificate Management"
"Certificate Procedures"
"Security Configuration"
"Session Configuration"
"Local Account Configuration"
"Login Banner" on page 39
The Local Account Configuration page lets you increase system security by:
• Locking out users who have exceeded the specified number and frequency
of login failures. The system locks the account either indefinitely or for the
length of time you specify.
• Disabling accounts that have been inactive a specified number of days.
The following table describes the fields on the Local Account Configuration
page.
Table 3-8 Fields on the Local Account Configuration page
Field
Account Lockout
Enable account lockout
Failed login threshold
Description
Specify the number of uppercase letters (A-Z) that a
password must contain.
Specify the number of digit characters (0-9) that a
password must contain.
Specify the number of non-alphanumeric keyboard
characters that a password must contain.
Specify how many sequential characters may be the
same.
on page 19
on page 23
on page 26
on page 32
on page 36
on page 38
Description
Turns on lockout feature and enables lockout
configuration fields below.
Specify how many consecutive login failures cause the
system to lock an account.
Local Account Configuration
Polycom, Inc.