Polycom DMA 7000 Operation Manual page 25

Test the System
Polycom, Inc.
— For a two-node cluster, there are two cluster members and that all four
network interfaces are up (green up arrow) and in full duplex mode,
with the private network speed at 1000 Mbps and the enterprise
network speed correct for your network
— For a single-node system, there is one cluster member and that the
single network interface is up (green up arrow) and in full duplex
mode, with the speed correct for your enterprise network
• The System Information section's details look correct, including the time,
enterprise directory status and conference room count, and custom
conference room count.
Set up some multipoint conferences by having endpoints dial into enterprise
users' conference rooms (preferably including a custom conference room).
Verify that conferencing works satisfactorily, that the system status is good,
and that the Dashboard accurately presents the status.
When you're satisfied that the Polycom DMA system is configured and
working properly, manually create a backup, download it, and store it in a safe
place. See "Backing Up and Restoring"
® ™
Polycom DMA System Initial Configuration Summary
on page 165.
17