Polycom DMA 7000 Operation Manual page 88

DMA Operations Guide
80
Table 6-2 Add Conference Template dialog box
Field
Common Settings
Name
Description
RMX General Settings
Use existing profile
RMX profile name
Cascaded conference
Description
A meaningful name for the template (up to 50
characters).
A brief description of the conference template (up to 50
characters).
Links this template to the RMX profile selected in the list
below.
For most purposes, we recommend leaving this box
unchecked and specifying conference properties
directly. See "Conference Templates"
Identifies the RMX profile to which this template is
linked. The list contains the names of all the profiles
available on the currently connected MCUs. If a profile
is only available on some of the connected MCUs, its
entry shows how many of the MCUs have that profile
(for instance, 2 of 3).
The system will put conferences using this template on
the least used RMX MCU that has this profile. If there
are none, it selects the least-used MCU and either uses
the Codian-specific settings (if it selected a Tandberg
Codian MCU) or falls back to the default conference
template (if it selected a Polycom RMX MCU).
Enables conferences using this template to span RMX
MCUs.
Cascading requires site topology information, which the
Polycom DMA system can get from a Polycom CMA
gatekeeper (see "CMA Integration"
can create (see "Site Topology Configuration"
page 119).
See "About Cascading" on page 78 for more information
about enabling cascading of conferences.
Conference Templates
on page 75.
on page 49) or you
on
Polycom, Inc.