Edit Mcu Dialog Box - Polycom DMA 7000 Operation Manual

MCUs

Edit MCU Dialog Box

Polycom, Inc.
Table 5-3 Add MCU dialog box
Field
Name
Management IP
Admin ID
Password
Video ports reserved for
CMA system
Voice ports reserved for
CMA system
Type
See also:
"MCUs" on page 59
"MCU Procedures"
Lets you edit an MCU. If there are existing calls and conferences on the MCU,
you must first stop using the MCU (terminating the calls and conferences) or
busy it out and wait for the calls and conferences to end.
The following table describes the fields in the dialog box.
Table 5-4 Edit MCU dialog box
Field
Name
Management IP
Admin ID
Password
Description
Host name of the MCU.
IP address for logging into the MCU.
Administrative user ID with which the Polycom DMA
system can log into the MCU.
Password for the administrative user ID.
The number of video ports on this MCU that are
off-limits to the Polycom DMA system.
Set this to the number of ports you want to reserve for
scheduled conferences (requires RMX v6.0
The number of audio ports on this MCU that are
off-limits to the Polycom DMA system.
Set this to the number of ports you want to reserve for
scheduled conferences (requires RMX v6.0 or later).
Lists the types of MCU for which the system is licensed.
Must be set to the correct MCU type in order for the
DMA system to be able to connect to it.
on page 64
Description
Host name of the MCU.
IP address for logging into the MCU.
Administrative user ID with which the Polycom DMA
system can log into the MCU.
Password for the administrative user ID.
Device Management
or later
).
63