Site-To-Site Exclusions; Add Site-To-Site Exclusion Wizard - Polycom DMA 7000 Operation Manual

DMA Operations Guide

Site-to-Site Exclusions

Add Site-to-Site Exclusion Wizard

124
The following table describes the fields in the dialog box.
Table 8-9 Edit Site Link dialog box
Field
Name
Description
From site
To site
The Site-to-Site Exclusions page contains a list of the direct site-to-site
connections that the site topology doesn't permit a call or session to use.
If the system is integrated with a CMA system, it receives this information
from that system, and this page is read-only. If not, you can define exclusions.
The commands in the Actions list let you add a site-to-site exclusion and delete
existing exclusions.
The following table describes the fields in the list.
Table 8-10 Information in the Site-to-Site Exclusions list
Column
From/To Site
To/From Site
Lets you define a new site-to-site exclusion in thePolycom DMA system's site
topology.
To add a site-to-site exclusion
Go to Configuration > Site Topology > Site-to-Site Exclusions.
1
In the Actions list, click Add.
2
In Step 1 of the wizard, select the first site for the exclusion. Click Next.
3
If the site you want isn't displayed in the list, you can search by site name.
Description
A meaningful name for the link (up to 128 characters).
A brief description of the link (up to 200 characters).
The originating site of the link. Can't be changed for a
site-to-cloud link.
The destination site of the link. Can't be changed for a
site-to-cloud link.
Description
Name of one of the two sites connected by the excluded
link.
Name of the other site.
Site-to-Site Exclusions
Polycom, Inc.