Security Configuration - Polycom DMA 7000 Operation Manual

DMA Operations Guide

Security Configuration

32
After the system restarts, log back in, return to Configuration > System >
6
Certificate Management, and verify that the system has reverted to the
default self-signed certificate:
In the list of certificates, select the Server SSL certificate.
a
In the Actions list, select Display Details.
b
The Certificate Details dialog box appears.
Confirm from the information under Issued To and Issued By that the
c
default self-signed certificate has replaced the CA-signed certificate.
Click OK to close the dialog box.
d
See also:
"Management and Security Overview"
"Certificate Management"
"Certificate Procedures"
The Security Configuration page lets you switch between high security mode
and a custom security mode in which one or more insecure capabilities are
allowed.
Caution
The setting labeled Maximum security in previous versions of the DMA software
has been renamed High security. We recommend always using the High security
setting unless you have a specific and compelling need to allow one of the insecure
capabilities.
The following table describes the options in the Security Configuration page.
Table 3-5 Fields on the Security Configuration page
Field
High security
Custom security
on page 19
on page 23
on page 26
Description
Recommended setting for normal operation.
Lets you enable one or more of the unsecured methods
of network access listed below it.
Security Configuration
Polycom, Inc.