Session Configuration - Polycom DMA 7000 Operation Manual

DMA Operations Guide

Session Configuration

36
Click OK.
5
See also:
"Management and Security Overview"
"Certificate Management"
"Certificate Procedures"
"Session Configuration"
"Local Password Requirements"
"Local Account Configuration"
"Login Banner" on page 39
The Session Configuration page lets you increase system security by limiting
the number and length of login sessions.
You can see the current login sessions and terminate sessions by going to
Operations > Sessions. See
The following table describes the fields on the Session Configuration page.
Table 3-6 Fields on the Session Configuration page
Field
Active system sessions
Active sessions per
user
Session timeout
(minutes)
on page 19
on page 23
on page 26
on page 36
on page 37
on page 38
"Monitoring Login Sessions"
Description
Specify the number of simultaneous login sessions by
all users (up to 80) or select Unlimited.
Note: If this limit is reached, but none of the logged-in
users is an Administrator, the first Administrator user to
arrive is granted access, and the system terminates the
non-Administrator session that's been idle the longest.
Specify the number of simultaneous login sessions per
user ID (up to 80) or select Unlimited.
Specify the length of time after which the system
terminates a session for inactivity (up to 999 minutes) or
select Unlimited.
Session Configuration
on page 160.
Polycom, Inc.