Polycom DMA 7000 Operation Manual page 99

Conference Templates
Polycom, Inc.
Table 6-3 Edit Conference Template dialog box (continued)
Field
Layout
Telepresence mode
Telepresence layout
mode
RMX Audio Settings
Echo suppression
Keyboard suppression
Audio clarity
Description
With Auto layout deselected, this opens the Select
Layout dialog box, where you can select the number
and arrangement of video frames. Once a layout is
chosen, a small representation of it appears here. See
"Select Layout Dialog Box"
Not available if Video switching is on.
Support for telepresence conference rooms joining the
conference:
• Auto (default) — A conference is automatically put
into telepresence mode when a telepresence
endpoint (RPX, TPX, or ATX) joins.
• Yes — Telepresence mode is on, regardless of
whether a telepresence endpoint is present.
• No — Telepresence mode is off, regardless of
whether a telepresence endpoint is present.
Available only on RMX v. 6.0 or later MCUs that are
licensed for telepresence mode. We recommend always
using Auto.
Layout choices for telepresence conferences:
• Manual — Layout is controlled manually by a
conference operator using the Multipoint Layout
Application (MLA) interface.
• Continuous Presence — Tells the MLA to generate
a multipoint view (standard or custom).
• Room Switch — Tells the MLA to use Voice
Activated Room Switching (VARS). The speaker's
site is the only one seen by others.
Not available if Telepresence mode is No. See the
Polycom Multipoint Layout Application User Guide for
more information about layouts.
Enables the MCU to detect and suppress echo.
Available only on MCUs with MPM+ or MPMx cards.
Enables the MCU to detect and suppress keyboard
noise.
Available only on MCUs with MPM+ or MPMx cards.
Improves the audio quality in conference of a PSTN
endpoint.
Available only on RMX v7 MCUs.
Conference Setup
on page 94.
91