Polycom DMA 7000 Operation Manual page 69

MCUs
Polycom, Inc.
Table 5-2 MCU commands
Command Description
View Details Opens the Device Details dialog box for the selected MCU.
Add Opens the Add MCU dialog box, where you can add an
MCU to the pool of devices that are available to the Polycom
DMA system.
Edit Opens the Edit MCU dialog box for the selected MCU,
where you can change its information and settings.
Delete Removes the selected MCU from the pool of devices that
are available to the Polycom DMA system. A dialog box asks
you to confirm.
Start Using Enables the Polycom DMA system to start using the
selected MCU as a conferencing resource.
Stop Using Stops the Polycom DMA system from using the selected
MCU as a conferencing resource. A dialog box asks you to
confirm. If you do so, existing calls on the MCU are
terminated or (for SIP calls only) migrated to in-service
MCUs with available capacity.
This command immediately terminates the system's use of
the MCU. It has no effect on the MCU itself, which continues
to accept any calls from other sources.
Busy Out Stops the Polycom DMA system from creating new
conferences on the selected MCU, but allows its existing
conferences to continue and accepts new calls to those
conferences. A dialog box asks you to confirm.
This winds down the system's use of the MCU gracefully. It
has no effect on the MCU itself, which continues to accept
any calls from other sources.
Device Management
61