Verifying The Machines Network Settings; Entering The User Name And Password In Http Settings - Konica Minolta bizhub PRO C5500 Setup Instructions

D. Verifying the Machines Network Settings
1. Press Utility\Counter button.
2. Press [Machine Admin Setting]. Enter administrator password, as required.
3. Press [Network Setting].
4. Press [Machine Nic Setting].
5. Press OK.
Note: If changes are made to the Network settings it is necessary to Cycle power by
turning off SW2 and SW1. Wait 15 seconds before powering on the MFP. Then wait until
the MFP comes to a full ready.
E. Entering the User Name and Password in HTTP Settings
1. Press Utility\Counter button.
2. Press [Machine Admin Setting]. Enter
administrator password, as required.
3. Press [Network Setting]
4. Press [HTTP Communication Setting]
5. Enter Authentication User Name:
example: test
6. Enter Authentication Password:
example: kmbs1
7. Enable [Proxy Server], [Proxy Server
Address Set],
8. [Proxy Server Port] and/or [Enable SSL] as required
Konica Minolta bizhub PRO C5500/C5501, C6500/C6501 Main bizhub vCare HTTP Setup Guide
Page 4 of 18