Admin. Password Initialize; 4.10 Settings In Counter; Procedure; Life - Konica Minolta bizhub C350 Service Manual

bizhub C350 Field Service Ver2.0 Sep. 2004
4.9

Admin. Password Initialize

Functions • To initialize the administrator code and PSL administrator code.
Use • Use to delete the current settings.
Setting/ • Select "Yes" and touch "END" to initialize the settings.

Procedure

4.10 Settings in Counter

• The Counter displays the counts of various counters to allow the Tech. Rep. to check or
set as necessary.
4.10.1 Procedure
1. Touch "Counter" to show the Counter menu.
2. Select the specific counter to be displayed.
3. To clear the counts of two or more counters within a group or across different groups at
once, touch "Counter Reset," select the specific counters to be cleared, and touch
"END." Two or more counters can be selected.
4.10.2

Life

Functions • To check the number of hours or times each of the different maintenance parts has
been used.
• To clear the count of each counter.
Use • When each of the maintenance parts is replaced.
Setting/ • To clear the count of a counter, select the specific part and press the Clear key.
Procedure • If a counter is cleared mistakenly, press the Interrupt key, which will undo the clearing
operation.
• It is not possible to clear the count of the counters for the Fusing Unit, Transfer Belt
Unit, and IU, which are provided with a new unit detection function.
1
• Fusing Unit: Number of times a sheet of paper is fed through
• Transfer Roller Unit: Number of times a sheet of paper is fed through
• Transfer Belt Unit: Number of times a sheet of paper is fed through
• Paper Powder Filter/Ozone Filter: Number of times a sheet of paper is fed through
• 1st.: Number of sheets of paper fed from Tray1
• 2nd.: Number of sheets of paper fed from Tray2
• 3rd.: Number of sheets of paper fed from Tray3
• 4th.: Number of sheets of paper fed from Tray4
• Manual Bypass : Number of sheets of paper fed from the Bypass
2
• Cyan IU: Period of time over which the Cyan Developing Unit has been used.
• Magenta IU: Period of time over which the Magenta Developing Unit has been used.
• Yellow IU: Period of time over which the Yellow Developing Unit has been used.
• Black IU: Period of time over which the Black Developing Unit has been used.
• LCT Parts: Number of sheets of paper fed from the LCT
• ADF Feed: Number of sheets of paper fed through the take-up section of the ADF
• ADF Rev.: Number of sheets of paper fed through the turnover unit of the ADF
• Sorter/Finisher: Number of sheets of paper fed out of the Sorter/Finisher
• Staple: Number of stapling sequences performed
• Punch: Number of hole-punch sequences performed
• Paper Fold: Number of folding sequences performed
TECH. REP. MODE
3-75