Oracle FS1-2 Installation Manual page 28

Table 14: Site preparation checklist (continued)
Check Site preparation or pre-installation planning items
❑
Note any problems or peculiarities at the site that require special
equipment.
❑
Determine if the power circuits are in place with adequate capacity and
appropriate power outlet and cord connector types.
❑
Determine if there will be raised floors, where the cabling will be under
the floor. For raised floors, cutout tiles with protected edges will be needed
prior to installation.
❑
Determine the environmental conditions at the installation site, including
temperature and humidity. The operating environment must remain
between the operating temperatures of 5º— 35º Celsius (41ºF — 95ºF) and
the relative humidity must remain between 10% and 90% non-condensing.
Operational altitude is from -200 to 10,000 feet.
❑
Ensure that the installation site provides adequate air conditioning. To
bring the room to the appropriate temperature, operate the air
conditioning system for 48 hours prior to the scheduled installation.
Unpacking logistics
❑
Ensure that there is a clear space of 21 feet (6.7 meters) for safely rolling
the racks off the pallet using the supplied ramps.
❑
Determine if there is a standard loading dock or if a truck with a lift gate is
required. Trucks with a proper lift gate might require special schedule
considerations.
Grounding requirements
❑
Determine if all powered racked equipment are properly grounded for
proper operation and safety. All power distribution units, branch wiring,
and receptacles must be listed as grounding-type devices. Connect each
component and power distribution unit into reliably grounded outlets.
CAUTION: To reduce the risk of electric shock or damage to installed
equipment, never disable the grounding plug on any power cord.
Documentation requirements
❑
Check the Oracle FS1-2 Flash Storage System Release Notes and MyOracle
Support (MOS) (https://support.oracle.com/) portal to see if any software
updates are available.
Oracle FS Systems: Installation Overview
28