Table of Contents
Advertisement
Oracle FS Systems: Installation Overview
Figure 3: Racked system: Installation overview
CAUTION: Do not turn on any power circuits until the installation is complete
and all internal cables are in place. Turning on the power to the system
prematurely can prevent the system from starting up correctly.
Tip: Review the information on Oracle FS System power requirements in this
guide.
Note: If the source of the main is from the ceiling, then care must be taken to re-
anchor and re-route the main power cables properly.
Note: Depending on the Oracle FS System configuration, the system startup can
take 30 minutes or longer. The process of starting up the Oracle FS System might
be initiated multiple times as the Controller ports are provisioned before the
ports are connected to the customer fabric.
16
Advertisement
Table of Contents
