Refitting The Rear Subframe - Ducati MONSTER 821 Workshop Manual

Refitting the rear subframe

For refitting the rear subframe, follow the procedure described in "Removing the rear subframe" in reverse
order.
If removed, smear the vibration damping pads with the indicated product, before fitting them on the
vehicle.
Slide out the rubber gaiter of rear subframe connector (4) from the rear side by at least 25 mm.
Release connector (5) from the rubber gaiter to allow a correct connection with connector (4).
Once connected, refit the two rubber gaiters and fix the rear subframe wiring with two ties (A).
634 Ducati Manuals Resource