Ecu 2 Connector - Ducati MONSTER 821 Workshop Manual

ECU 2 connector

REMOVAL/REASSEMBLY
To remove and refit the ECU control unit refer to chapters "Removing the airbox and throttle body" and "Refitting
the airbox and throttle body".
Coils
The ignition coil increases the input voltage of the current alternator and brings the voltage to a value that
allows the spark creation in the spark plug.
The vehicle features two coils, one for the horizontal cylinder (1) and another for the vertical cylinder (2),
located under the LH covers (3) and (4).
REMOVAL PROCEDURE
To reach the coils, remove the LH covers (3) and (4) as indicated in paragraph "Removing the water
tank".
363 Ducati Manuals Resource