Ducati MONSTER 821 Workshop Manual page 1040

Remove service tool.
Check that the pin (H) placed on the gearbox selector drum is aligned with the notch (L) on the gear pawl
(with gear in neutral).
With the gearbox in neutral, check that the lever travel is the same when shifting up and down. The same
should apply when a gear is engaged.
Operate the gearchange lever and turn the front sprocket at the same time to check that all the gears
engage when shifting up and down.
Remove the previously installed lever and sprocket.
Refit the flywheel/generator assembly and the generator cover (Refitting the flywheel/generator
assembly).
Refit the pump-water radiator hose (Refitting cooling system hoses and
unions).
Refit the pump-cylinder hoses (Refitting the cylinder/piston
assembly).
Refill the cooling system (Changing the
coolant).
Refit the gear shift (Refitting the gearbox
unit).
Fill the system with engine oil
(Changing the engine oil and filter cartridge).
1040 Ducati Manuals Resource