Refitting the primary drive gears
If previously removed, refit the complete oil pump and the oil pump gear
(Refitting the water
pump).
Fully degrease the crankshaft splined end and the corresponding spline on the primary drive gear.
Make sure that key (10) is positioned on crankshaft.
Insert washer (9) on crankshaft, respecting key (10) positioning.
Fit the driving gear (7) onto the crankshaft with the oil pump drive sprocket facing the crankcase.
Temporarily secure the gear with the washer (5) and nut (6).
1030
Ducati Manuals Resource