Disassembling gear interlock plunger and ratchet
Drain the engine oil
(Changing the engine oil and filter
cartridge).
Remove the clutch cover
(Removing the clutch
cover).
Remove the clutch unit
(Removing the
clutch).
Remove the primary drive gear
(Removing the primary drive
gear).
Undo the interlock plunger screw (1) and remove the seal (2), the spring (3) and the ball (4).
Undo the clutch-side crankcase half screw (5) and remove the ratchet (6), the washer (7) and the spring
(8).
1043
Ducati Manuals Resource