Disassembling the gearbox shafts
Place the shaft in a vice in such a way to facilitate the disassembly operations.
Important
Take care not to invert the shim position upon reassembly: this would potentially lead to jamming when
using the gear selector control, making it necessary to reopen the crankcase.
Disassembling the gearbox secondary shaft
Disassemble the complete secondary shaft (1), removing the components listed below in the indicated
order, starting from the clutch side.
Remove the first speed gear (3), remove the roller bearing cage (4) and the shim (5).
1061
Ducati Manuals Resource