Table E
Front branches in headlight rear area
EUROPE VERSION
Tie the wirings as shown in the figure, in particular:
- use a tie (F) to fasten the throttle control cable (22), the front brake switch cable (21) and the right-hand
switch cable (20) to pipe (G) of the front braking system fluid tank;
- use tie (H) that fastens pipe (G), throttle control cable (22), front brake switch cable (21) and right-hand
switch cable (20);
- use a tie (I) to fasten together the clutch cable (E), the left-hand switch cable (23) and the clutch switch
cable (25);
- use a tie (J) to fasten the exceeding length of the LH turn indicator cable (23), the left-hand switch cable
(24) and the clutch switch cable (25).
After fitting the ties, fasten the wirings in cable rings (C) on the right and (D) on the left side, as indicated.
214
Ducati Manuals Resource