Removing The Front Brake Master Cylinder - Ducati MONSTER 821 Workshop Manual

Removing the front brake master cylinder

Warning
The brake master cylinder manufacturer advises against servicing the brake master cylinder due to the
safety critical nature of this component. Incorrect overhaul can endanger rider and passenger safety.
Maintenance operations on these units are limited to replacement of the following parts: control lever, fluid
reservoir assembly and relative fasteners and master cylinder fasteners.
Remove the light assembly (Removing the light
assembly).
Drain the front brake system (Changing the front brake system
fluid).
Remove the RH rear-view mirror (Removing the rear-view
mirrors).
Release pipes and wirings from clips (1) and cable rings (2).
For the front ABS brake system, please also refer to sections "ABS system operation information" and
chapters "System components" and "ABS component maintenance".
Undo the special screw (3), collecting the sealing washers (4) to release the front brake master cylinder
436 Ducati Manuals Resource