Checking and adjusting the valve clearance
Remove the seat
(Removing the
seat).
Remove the lateral covers (Changing the coolant,
Removing the water
tank).
Remove the fuel tank
(Removing the fuel
tank).
Remove the airbox
(Removing the airbox and throttle
body).
Loosen the timing belt covers
(Removing the timing belt external
covers).
Loosen the water radiator retaining screws by leaving the radiator connected to the cooling system
(Removing the water
radiator).
Disconnect the coil caps.
Disconnect the secondary air units of the head covers
(Removing the secondary air
system).
Remove the cylinder head cover
(Removing the
camshafts).
Note
For clarity, the figures show the engine removed from the frame.
Loosen the two screws (1) retaining cover (2) and remove them together with gasket (3).
860
Ducati Manuals Resource