Refitting the rear mudguard
Fit the rear mudguard (1) on swinging arm by inserting it from the RH side.
Start side screw (3).
Tighten the two central screws (2) with pre-applied threadlocker to a torque of 5 Nm ± 10%.
Note
If the screws are new, apply specified threadlocker on screw threads.
Tighten the screw (3) to a torque of 5 Nm ± 10%.
If the rear wheel has been removed, refit it
(Refitting the rear
wheel).
162
Ducati Manuals Resource