Changing the PIN CODE
To change the existing PIN CODE and activate a new one, you must open the SETTING MENU.
Select "PIN" option, by pressing button (1) or (2).
Once function is highlighted, press CONFIRM MENU button (4).
Note
If upon accessing this function, the "N : " (New) and four flashing dashes "- - - -" are shown, it means that
the PIN CODE has never been activated and it is necessary to do it.
When accessing the function, the display will show "O: " (old) followed by four flashing dashes "- - - -".
Note
To change the PIN CODE, you must know the already stored PIN.
To go back to the previous indication without modifying the PIN CODE, press button (2); as soon as the
"EXIT" box starts flashing, press button (4) again.
Entering the "old" code
1) Press button (4) only one digit indicating "0" starts flashing;
2) Each time you press button (2) the displayed number increases by one (+ 1) up to "9" and then starts
back from "0";
3) Each time you press the button (1) the displayed number decreases by one (- 1) up to "1" and then
starts back from "0";
4) To confirm the number, press the button (4).
Repeat the procedures until you confirm all the digits of the PIN CODE.
After pressing button (4) to confirm the fourth and last figure, the 4-digit code stops flashing.
Repeat the procedures until you confirm all the digits of the PIN CODE.
Entering the "new" code
1) Press button (4) only one digit indicating "0" starts flashing;
2) Each time you press button (2) the displayed number increases by one (+ 1) up to "9" and then starts
back from "0";
3) Each time you press the button (1) the displayed number decreases by one (- 1) up to "1" and then
starts back from "0";
4) To confirm the number, press the button (4).
Repeat the procedures until you confirm all the digits of the PIN CODE.
282
Ducati Manuals Resource