Disassembling The Gear Change Control - Ducati MONSTER 821 Workshop Manual

Disassembling the gear change control

Refer to the exploded view for indications on disassembly and replacement of unit components.
If the bush (5) inside the pedal (2) needs replacing, grease the external surface and drive the new bush
into place using a press. The bush must be seated 2 mm below the outer face of the pedal.
Warning
After working on the gear change control, check the position of the gear pedal.
To adjust the gear pedal position, follow the instructions under Section "Adjusting the position of the gear and
rear brake pedals.".
522 Ducati Manuals Resource