Vehicle Release - Ducati MONSTER 821 Workshop Manual

When you press button (4) to confirm the fourth and last digit, the instrument panel highlights the message
"MEM" and the relevant box will start flashing.
To save the new setting, hold button (4) for 2 seconds while the message "MEM" is highlighted.
- If settings have been saved (D), the message "MEM" and the relevant box will be shown steady ON for 2
seconds, and then the "EXIT" box will start flashing.
- If settings have not been saved, the instrument panel will highlight again the string of four dashes "- - - -
" of the new PIN to allow the rider to try again and enter a new code.
To quit, press button (4).
Note
You can change your PIN CODE an unlimited number of times.

VEHICLE RELEASE

This function allows starting the vehicle temporarily in case of an engine failed operation due to a
malfunction of the immobilizer system.
If upon key-on an immobilizer ERROR occurs, the instrument panel automatically activates in MENU 1 the
possibility to enter the four-digit PIN CODE previously memorised with the relevant function in the Setting
Menu, PIN page.
Entering the code:
1) Each time you press button (2), the displayed number increases from "0" to "9" and then returns to "0";
2) To confirm the number, press button (4);
3) Repeat the procedure until entering the fourth digit;
4) Press button (4) again to confirm.
283 Ducati Manuals Resource