Ducati MONSTER 821 Workshop Manual page 866

Tighten screws (1) and (1A) of the plastic covers to a torque of 10 Nm (Min. 9 Nm - Max. 11 Nm), following
the sequence indicated in the figure.
Note
If the above operations have been carried out with the engine installed in the frame, refit the previously
removed parts.
Refit the vertical cylinder exhaust heat guard cover on the right side (Refitting the exhaust
system).
Connect the secondary air unit (Refitting the secondary air
system).
Refit the fuel tank (Refitting the fuel
tank).
Refit the seat (Refitting the
seat).
866 Ducati Manuals Resource