Reassembling The Clutch Cover - Ducati MONSTER 821 Workshop Manual

Reassembling the clutch cover

Apply specified grease on roller bearing (21) and position it fully home in seat (A) of cover (3).
Apply specified grease on roller bearing (20) and position it fully home in seat (B) of cover (3) on roller
bearing (20).
Apply specified lubricant on seal ring (19) and position it fully home in seat (C) of cover (3).
Lubricate sliding pins (D) of clutch drive shaft (17) with specified grease.
Insert clutch drive shaft (17) in seal ring (19) having care not to damage it.
To insert the clutch drive shaft (17) inside clutch cover (3), position spring (18) considering that part (E)
has to be engaged in recess (F): bring the clutch drive shaft (17) fully home on clutch cover (3).
Rotate clutch drive shaft (17) counter clockwise until part (G) touches bearing surface (H).
Insert snap ring (16) of clutch drive shaft (17) fully inside groove (L).
1020 Ducati Manuals Resource