Overhauling the flywheel/generator assembly
Inspect the inner part of generator rotor (8) for signs of damage.
Check that the starter clutch is working properly and that the roller races do not show signs of wear or
damage of any kind.
Disassemble the unit if you find faulty operation.
Disassembling the flywheel/generator assembly
Unscrew the eight screws (9) and remove the generator rotor (10) from the flywheel.
Start two of the screws (9) just removed from the flywheel rotor side in order to remove the flange (11)
and the starter clutch (12) from the flywheel (13).
The starter clutch is a slight interference fit on the flange.
Use a suitable drift to remove it.
1081
Ducati Manuals Resource