Removing The Flywheel/Generator Assembly - Ducati MONSTER 821 Workshop Manual

Removing the flywheel/generator assembly

Drain the coolant (Changing the
coolant).
Drain the engine oil (Changing the engine oil and filter
cartridge).
Remove the cooling system hoses (Removing cooling system hoses and
unions).
Remove the generator cover (Removing the generator
cover).
Fix tool (A) part no. 88713.3367 to the mounting holes M10 (B) of side stand.
Secure the tool to the flywheel with the screws (C).
Unscrew the generator-flywheel retaining nut (1).
Warning
While unscrewing the nut, apply axial pressure to the socket to avoid damage or injury in the event of the
wrench suddenly slipping off the nut.
Remove the nut (1), the washer (2) and the flywheel assembly (3) with the driven gear (4) from the
crankshaft.
1087 Ducati Manuals Resource