Tap the cover at different positions with a rubber mallet to facilitate its location on the shafts and centring
bushes.
Note
Should it be necessary to remove the cover again, fit the puller no. 88713.1749 in the threaded holes, at
the crankshaft.
Insert the fixing screws in their holes following the indications given in the table.
Ref.
Q.ty
3
2
4
9
5
2
Tighten the retaining screws to a torque of 13.5 Nm (Min. 12.5 Nm - Max. 14.5 Nm).
Description
M6x25 mm screws
M6x20 mm screws
M6x30 mm screws
1075
Ducati Manuals Resource