Place starter motor/solenoid starter cable (2) and tighten starter motor fastening nut (3) to a torque of 5
Nm ± 10%.
Important
Fill the protection cap with protective grease before fitting it on the starter motor.
Position protection cap (1).
Refit the complete generator
(Fitting the flywheel/generator
assembly) and the generator side cover
(Fitting the
generator
cover).
Refit the cooling system hose
(Refitting cooling system hoses and
unions).
Refill the cooling system
(Checking the coolant
level).
Fill the engine with oil
(Changing the engine oil and filter
cartridge).
Refit the lower wiring covers
(Closing the
crankcase).
Refit the exhaust system
(Refitting the exhaust
system).
1096
Ducati Manuals Resource