Refitting The Rear Sprocket - Ducati MONSTER 821 Workshop Manual

Refitting the rear sprocket

Lubricate the pins (9) ends of the rear sprocket flange (8) with the indicated product.
Place rear sprocket flange (8) inside vibration damping pads (10) located in the rear rim.
Fit bearing (14), spacer (13), bearing (12) and snap ring (11).
Fit rear sprocket (7) on flange (8).
Position the rear sprocket/flange group on the rear rim, tighten the five nuts (6) to a torque of 44 Nm ± 5%
following a cross pattern.
597 Ducati Manuals Resource