Ducati MONSTER 821 Workshop Manual page 1116

If previously removed, apply recommended threadlocker on dowel (25), tighten to a torque of 15 Nm (Min.
13.5 Nm - Max. 16.5 Nm), fit the seal (26) on the service plug (27): the seal must be positioned so that the
cutting edge (V) faces the clutch-side crankcase half.
Apply the specified threadlocker on the plug thread (27), insert it in the crankcase half and tighten to a
torque of 15 Nm (Min. 13 Nm - Max. 17 Nm).
Refit the oil filter (Changing the engine oil and filter
Refit the primary drive gear
Refit the oil pump (Refitting the oil
Refit the clutch unit (Refitting the
Refit the clutch cover (Refitting the clutch
Refit the starter motor (Refitting the starter
Refit the complete generator
generator cover).
Refit the complete cylinder/piston assembly
Refit the complete cylinder head assembly
Refit the timing pulleys (Refitting the cylinder head pulleys/fixed
Refit the timing belts (Refitting the timing
Refit the external timing belt covers
cartridge).
(Refitting the primary drive gear and checking
pump).
clutch).
cover).
motor).
(Fitting the flywheel/generator
(Refitting the cylinder/piston
(Refitting the cylinder
belts).
(Refitting the timing belt external
1116
backlash).
assembly) and the generator side cover
assembly).
heads).
tensioners).
covers).
(Fitting the
Ducati Manuals Resource