Refitting the footpeg holder plate
Working on the LH footpeg holder plate (16), refit the gear change control
(Refitting the gear change
control),
fit spacer (18) in its seat and fit the footpeg holder plate on the vehicle.
After applying the indicated product on the thread and on the underhead, start screw (15).
Working on the RH footpeg holder plate (14), refit the complete rear brake control
(Refitting the rear brake
control), fit spacer (17) in its seat and fit the footpeg holder plate on the vehicle.
After applying the indicated product on the thread and on the underhead, start screw (9).
610
Ducati Manuals Resource