Refitting the footpegs
Refitting the front footpegs
Note
The refitting of the front RH footpeg is described in detail; the LH footpeg can be removed following the
same procedure.
Position spring (4) so that the end (A) rests on the footpeg (3).
Position footpeg (3) inserting the end (C) of spring (4) in the hole (D) of the frame plate.
Fit pin (2) as shown.
Lock pin (2) using circlip (1).
If previously removed, refit the footpeg rubber block (7).
Refitting the rear footpegs
Note
Refitting of the rear RH footpeg is described in detail; the LH footpeg can be removed following the same
618
Ducati Manuals Resource