Refitting The Rear Swinging Arm - Ducati MONSTER 821 Workshop Manual

Refitting the rear swinging arm

Working on swinging arm left side, lubricate roller bearing cage seat with the specified product.
Using a suitable tool, insert the two roller bearing cages (21) and seals (20).
Warning
Roller bearing cages must be inserted so that the marks are facing outwards.
Warning
Seals must be inserted with the flat surface facing outwards.
Check the position of the seal rings.
Working on swinging arm right arm, lubricate bearing seats with the specified product and insert inner
spacer (19) and the two bearings (18) with a suitable tool.
580 Ducati Manuals Resource