Removing The Gearbox Assembly - Ducati MONSTER 821 Workshop Manual

Removing the gearbox assembly

Remove the engine from the frame (Removing the
engine).
Remove the external belt covers (Removing the timing belt external
covers).
Remove the camshaft assembly (Removing the
camshafts).
Remove the complete cylinder head assembly (Removing the cylinder
heads).
Remove the complete cylinder/piston assembly (Removing the cylinder/piston
assembly).
Remove the generator side cover (Removing the generator cover) and the complete generator (Removing the
flywheel/generator assembly).
Remove the oil pump (Removing the oil
pump).
Remove the starter motor (Removing the starter
motor).
Remove the clutch cover (Removing the clutch
cover).
Remove the clutch unit (Removing the
clutch).
Remove the primary drive gear (Removing the primary drive
gear).
Separate the crankcase halves (Separating the crankcase
halves).
Withdraw the selector fork shafts (1).
Move the forks (2) and (3) to disengage them from the slots in the gear selector drum (5).
1068 Ducati Manuals Resource