Ducati MONSTER 821 Workshop Manual page 159

"HIGH SEAT" position
The vehicle in the basic condition is in the "HIGH SEAT" configuration.
To change the riding position to "HIGH SEAT" follow the previously described procedure in the reverse order
and tighten the two screws (2) to a torque of 3 Nm ± 10% on the relevant clips.
On the seat internal side, fit the two front (6) and rear (5) supports as indicated on them, with arrows (E)
facing the front side of the vehicle and insert the lateral tabs in the relevant seats.
Note
The front and rear buffers differ from each other. To identify them refer to the indication printed on them
(FRONT) or (REAR).
159 Ducati Manuals Resource