Setting Snmpv3 Views; Figure 3-31 Configuring Snmpv3 Groups - Digisol DG-FS4526 Management Manual

3
Configuring the Switch
Web – Click SNMP, SNMPv3, Groups. Click New to configure a new group. In the
New Group page, define a name, assign a security model and level, and then select
read and write views. Click Add to save the new group and return to the Groups list.
To delete a group, check the box next to the group name, then click Delete.

Setting SNMPv3 Views

SNMPv3 views are used to restrict user access to specified portions of the MIB tree.
The predefined view "defaultview" includes access to the entire MIB tree.
Command Attributes
• View Name – The name of the SNMP view. (Range: 1-64 characters)
• View OID Subtrees – Shows the currently configured object identifiers of branches
within the MIB tree that define the SNMP view.
• Edit OID Subtrees – Allows you to configure the object identifiers of branches
within the MIB tree. Wild cards can be used to mask a specific portion of the OID
string.
3-46

Figure 3-31 Configuring SNMPv3 Groups

www.digisol.com