Lldp Dot1-Tlv Proto-Vid; Lldp Dot1-Tlv Pvid - Digisol DG-FS4526 Management Manual

Syntax
dot1-tlv proto-ident
[no] lldp
Default Setting
Enabled
Command Mode
Interface Configuration (Ethernet, Port Channel)
Command Usage
This option advertises the protocols that are accessible through this interface.
Example
Console(config)#interface ethernet 1/1
Console(config-if)#no lldp dot1-tlv proto-ident
Console(config-if)#

lldp dot1-tlv proto-vid

This command configures an LLDP-enabled port to advertise port related VLAN
information. Use the no form to disable this feature.
Syntax
[no] lldp dot1-tlv proto-vid
Default Setting
Enabled
Command Mode
Interface Configuration (Ethernet, Port Channel)
Command Usage
This option advertises the port-based and protocol-based VLANs configured
on this interface (see "Configuring VLAN Interfaces" on page 4-226 and
"Configuring Protocol-based VLANs" on page 4-243).
Example
Console(config)#interface ethernet 1/1
Console(config-if)#no lldp dot1-tlv proto-vid
Console(config-if)#

lldp dot1-tlv pvid

This command configures an LLDP-enabled port to advertise its default VLAN ID.
Use the no form to disable this feature.
Syntax
[no] lldp dot1-tlv pvid
www.digisol.com
DG-FS4526 User Manual
4
4-189