Web-Auth Session-Timeout; Web-Auth System-Auth-Control - Digisol DG-FS4526 Management Manual

Example
Console(config)#web-auth quiet-period 120
Console(config)#

web-auth session-timeout

This command defines the amount of time a web-authentication session remains
valid. When the session-timeout time has been reached, the host is logged off and
must re-authenticate itself the next time data transmission takes place. Use the no
form to restore the default.
Syntax
web-auth session-timeout timeout
no web-auth session timeout
timeout - The amount of time that an authenticated session remains valid.
(Range: 300-3600 seconds)
Default Setting
3600 seconds
Command Mode
Global Configuration
Example
Console(config)#web-auth session-timeout 1800
Console(config)#

web-auth system-auth-control

This command globally enables web authentication for the switch. Use the no form
to restore the default.
Syntax
[no] web-auth system-auth-control
Default Setting
Disabled
Command Mode
Global Configuration
Command Usage
Both web-auth system-auth-control for the switch and web-auth for an
interface must be enabled for the web authentication feature to be active.
Example
Console(config)#web-auth system-auth-control
Console(config)#
www.digisol.com
DG-FS4526 User Manual
4
4-117