Configuring Aaa Accounting; Figure 3-36 Aaa Tacacs+ Group Settings - Digisol DG-FS4526 Management Manual

3
Configuring the Switch
Web – Click Security, AAA, TACACS+ Group Settings. Enter the TACACS+ group
name, followed by the number of the server, then click Add.
CLI – Specify the group name for a list of TACACS+ servers, and then specify the
index number of a TACACS+ server to add it to the group.
Console(config)#aaa group server tacacs tps-tacacs+
Console(config-sg-tacacs)#server 1
Console(config-sg-tacacs)#

Configuring AAA Accounting

AAA accounting is a feature that enables the accounting of requested services for
billing or security purposes.
Command Attributes
• Method Name – Specifies an accounting method for service requests.
The "default" methods are used for a requested service if no other methods have
been defined. (Range: 1-255 characters)
The method name is only used to describe the accounting method(s) configured
on the specified accounting servers, and do not actually send any information to
the servers about the methods to use.
• Service Request – Specifies the service as either 802.1X (user accounting) or
Exec (administrative accounting for local console, Telnet, or SSH connections).
• Accounting Notice – Records user activity from log-in to log-off point.
• Group Name - Specifes the accounting server group. (Range: 1-255 characters)
The group names "radius" and "tacacs+" specifies all configured RADIUS and
TACACS+ hosts (see "Configuring Local/Remote Logon Authentication" on page
3-50). Any other group name refers to a server group configured on the RADIUS
or TACACS+ Group Settings pages.
3-56

Figure 3-36 AAA TACACS+ Group Settings

www.digisol.com
4-89
4-89