Displaying Basic VLAN Information
The VLAN Basic Information page displays basic information on the VLAN type
supported by the switch.
Field Attributes
• VLAN Version Number
the IEEE 802.1Q standard.
• Maximum VLAN ID – Maximum VLAN ID recognized by this switch.
• Maximum Number of Supported VLANs – Maximum number of VLANs that can
be configured on this switch.
Web – Click VLAN, 802.1Q VLAN, Basic Information.
CLI – Enter the following command.
Console#show bridge-ext
Max Support VLAN Numbers:
Max Support VLAN ID:
Extended Multicast Filtering Services: No
Static Entry Individual Port:
VLAN Learning:
Configurable PVID Tagging:
Local VLAN Capable:
Traffic Classes:
Global GVRP Status:
GMRP:
Console#
Displaying Current VLANs
The VLAN Current Table shows the current port members of each VLAN and
whether or not the port supports VLAN tagging. Ports assigned to a large VLAN
group that crosses several switches should use VLAN tagging. However, if you just
want to create a small port-based VLAN for one or two switches, you can disable
tagging.
Command Attributes (Web)
• VLAN ID – ID of configured VLAN (1-4094).
8. Web Only.
8
– The VLAN version used by this switch as specified in
Figure 3-90 Displaying Basic VLAN Information
www.digisol.com
DG-FS4526 User Manual
256
4094
Yes
IVL
Yes
No
Enabled
Disabled
Disabled
3
4-221
3-147